(1) PASSWORD CHANGE
·6-DIGIT PASSWORD
·DEFAULT PASSWORD SETTING:
111111
When you select “CHANGE PASSWORD”, the menu below will open.
1.Press the channel 1 button six times.
2.Once you have input the current password, you can set a new password.
3.Then confirm the password you have set.
·You can use a combination of any of the buttons, except the [MENU] button on the front of your DVR to set a new password
·When the new password is accepted the following screen message will flash: “Password changed”
·The message will blink 3 times. Then the “MENU” will return. If the password is not accepted you will receive a message that informs you that it was not accepted and the “MENU” returns. You may try again by repeating the same steps.
NOTICE: The Factory Default Password is 111111.This number
(1)Corresponds with the button for camera “one” on the front of your DVR.
