Q-See QSD6204 manual Network Setup User Setup

Static verses dynamic addresses: You can access the DVR through a static or dynamic IP address, however a dynamic address can change from time to time. How often depends on your service provider. We suggest www.Dyndns.org or www.no-ip.com domain name service. If you register your domain name for the DVR, you can use this service to connect to your DVR without the need for a static or public IP address. You do need to leave a computer attached to the router and ON to be able to use this service, but it could help avoid the higher cost of having a static address.

NETWORK

SETUP

-USER SETUP

When a user connects to the DVR via the Internet, Internet Explorer will prompt the user to enter a username and password. There are two kinds of user, ADMIN and USER.

The default value for username and password of “USER” is blank, Nothing. This allows the user to connect without username or password.

However, in order to control the DVR, the user must login as “ADMIN ”, and at that time must type the username and Password set by this menu.

-31-