QSC Audio CXD4.3, CXD4.2, CXD4.5 Home Outputs Spkr Proc Load Spkr Enter, Adjust selected parameter

HOME > OUTPUTS > SPKR PROC > LOAD SPKR > ENTER

Step 1 — Load an Existing Loudspeaker for the Selected Output

ABOUT	SPEAKERS		LOAD		To edit Speaker, press
	Output:	A		Band and Filter	Scroll to select Speaker model
				selections are
					To confirm, press
Speaker:	WL2102 BiLFNS			displayed and
				constrained based	Scroll to (Band, Filter)
Band:	2-Way LF			on the loudspeaker.
Filter:	80 Hz				To adjust, press
					Adjust selected parameter
	CONFIRM
					To confirm, press
					Scroll to LOAD
				To Load the speaker profile to the selected output, press

ENTER

ENTER

ENTER

ENTER

ENTER

EN

Crossover

HOME > OUTPUTS > SPKR PROC > CROSSOVER > HIGH-PASS (or LOW-PASS) > ENTER Step 1 — Set the Crossover High- and/or Low-pass filters

F1: A B C D			Output
			A
			20 dB
			-60 dB
HPF	Freq	Type	Slope
	70.0	BWrth	24dB/oct

Freq: 20 - 20 kHz

Type:

•Butterworth

•Linkwitz-Riley,

•Bessel-Thomson

Slope:

6dB to 48dB/oct depending on Type

Scroll to select (Freq, Type, Slope) To edit, press Turn to adjust parameter To confirm, press To exit, press

ENTER

ENTER

EXIT

HOME > OUTPUTS > SPKR PROC > CROSSOVER > GAIN/POL > GAIN > ENTER Step 2 — Set the Crossover Gain and Polarity

F1: A B C D		Output
		A
		20 dB
		-60 dB
Gn/Pol	Gain	Polarity
	-5.5 dB	POL +

+

Gain -100 to +20 dB

–

Polarity + or -

Scroll to select (Gain or Polarity) To edit, press Turn to adjust parameter To confirm, press To exit, press

ENTER

ENTER

EXIT

TD-000367-00-A 20