Quadra-Fire QFP38-NG Lighting Instructions IPI, To Turn Off Gas To Appliance, Natural Gas, Fire

Models: QFP38-NG QFP38-LP

1 76
Download 76 pages 45.19 Kb
Page 20
Image 20

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FOR YOUR SAFETY READ BEFORE LIGHTING

This appliance needs fresh air for safe operation

 

 

 

adequate combustion and ventilation air.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and must be installed so there are provisions for

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING:￿

If you do not follow these instructions exactly, a

 

 

 

 

This appliance must be installed in accordance with

 

 

 

 

 

 

 

fire or explosion may result causing property

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

local codes, if any; if not, follow ANSI Z223.1 or, in

 

 

 

 

 

 

 

damage, personal injury or loss of life.

 

 

 

 

Canada, current CAN/CGA-B149.

 

 

 

 

 

 

 

 

 

 

 

A.￿

This appliance is equipped with an ignition device which

￿

•￿ If you cannot reach your gas supplier, call the fire

This appliance must be properly connected to a

 

 

 

automatically lights the pilot. DO NOT try to light the pilot by

 

department.

 

 

 

 

venting system in accordance with the

 

 

 

hand.

 

C.￿

Use only your hand to turn the gas control knob. Never use

manufacturer's installation instructions.

 

 

B.￿

BEFORE LIGHTING smell all around the appliance area for

 

 

 

 

 

WARNING: Improper installation,

 

 

 

tools. If the lever or knob will not move by hand, don't try to

 

 

 

gas. Be sure to smell next to the floor because some gas is

 

 

 

 

heavier than air and will settle on the floor.

 

 

repair it, call a qualified service technician. Force or

adjustment, alteration, service or maintenance can

 

 

 

 

 

attempted repair may result in a fire or explosion.

 

 

￿

WHAT TO DO IF YOU SMELL GAS

 

 

cause injury or property damage. Refer to the

 

 

 

D.￿

Do not use this appliance if any part has been under water.

 

 

￿

•￿ Do not try to light any appliance.

 

owner's information manual provided with the

Quadra-

 

 

Immediately call a qualified service technician to inspect the

￿

•￿ Do not touch any electric switch; do not use any phone in

 

appliance and to replace any part of the control system and

appliance. For assistance or additional information

 

 

 

your building.

 

 

any gas control which has been under water.

consult a qualified installer, service agency or the

Fire

￿ •￿ Immediately call your gas supplier from a neighbor's

 

 

 

 

 

 

gas supplier.

 

phone. Follow the gas supplier's instructions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION: Hot while in operation. Do not touch.

•QFP38

 

 

 

 

LIGHTING INSTRUCTIONS

 

 

 

 

 

 

 

 

 

 

 

 

Keep children, clothing, furniture, gasoline and other liquids

Series•

 

 

 

 

 

 

 

 

 

 

 

 

having flammable vapors away.

2.￿

Turn OFF the gas supply to the appliance.

 

 

don't smell gas, go to the next step.

 

 

 

 

 

 

 

 

 

 

WARNING RISK OF FIRE

 

 

1.￿ STOP! Read the safety information above on this label.

 

STOP! Follow "B" in the safety information above on this label. If you

 

 

 

4061

 

3.￿

Turn OFF all electric power to the appliance.

6.￿

To turn on the burner, turn on all electric power to this appliance and

This appliance is intended to burn a specified gas fuel only. Do

 

4.￿

This appliance is equipped with an ignition device which

 

turn on the gas supply.

 

 

 

 

-

 

 

automatically lights the pilot. DO NOT try to light the pilot

7.￿

Press the “ON/OFF” key on the transmitter.

 

 

not attempt to use with solid wood fuel or another type of fuel.

300

 

 

 

 

Do not attempt to modify or use any other type of gas burner

 

 

by hand.

 

8.￿

If the appliance will not operate, follow the instructions "TO TURN OFF

Rev

 

 

system.

5.￿

Wait five minutes to clear out any gas. If you then smell gas,

 

GAS TO APPLIANCE" and call your service technician or gas supplier.

i •

 

 

TO TURN OFF GAS TO APPLIANCE

 

WARNING: Disconnect the electric power before

9/09

 

 

 

 

 

 

 

 

 

 

 

 

appliance must be replaced, it must be replaced with 105° C or its

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

servicing. If for any reason the original wire supplied with the

 

 

1.￿ Press “ON/OFF” key on the transmitter.

 

 

 

 

 

 

 

equivalent.

 

 

2.￿ Turn OFF all electric power to the appliance if service is to be

 

 

 

 

 

 

 

 

 

 

 

 

performed.

 

 

Gas Supply

Gas Supply

 

 

 

 

 

3.￿ Turn gas supply OFF.

 

 

Closed (OFF)

Open (ON)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*￿Also certified for installation in a bedroom or a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

bed-sitting room.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*￿For U.S. only!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Due to high surface temperatures, keep children, clothing and furniture away.

 

 

 

 

 

 

NATURAL GAS

 

 

 

Keep burner and control compartment clean. See installation and operating instructions accompanying the appliance.

4061-309a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• • •

Q

If your fireplace must be deactivated for serviced or an

The IPI system may be operated with four AA batteries

For normal use, activate/deactivate your fireplace with

. Lighting Instructions (IPI)

extended period of

.

the remote control.

 

time, follow the instructions below.

 

 

 

Page 20
Image 20
Quadra-Fire QFP38-NG Lighting Instructions IPI, To Turn Off Gas To Appliance, For Your Safety Read Before Lighting, Fire