Radio Shack 15-2130 owner manual View Device Codes, Viewing Codes, Reassigning Device Keys

Remote Control

VIEW DEVICE CODES

To determine the 4-digit code for each device set up in your remote perform the following steps:

VIEWING CODES

1.Press the desired device key (TV, VCR, CBL/SAT or DVD). The red light blinks one time.

2.Press P key. The red light blinks two times.

3.Press number 1 digit key. Press P key. Count the blinks (for example, if the red light blinks five times the first digit in the code is 5). Write down the number.

Note: The red light will not blink if the digit in the code is the number 0.

4.Press number 2 digit key. Press P key. Count the blinks. Write down the number.

5.Press number 3 digit key. Press P key. Count the blinks. Write down the number.

6.Press number 4 digit key. Press P key. Count the blinks. Write down the number.

You can re-verify the number of blinks to identify either the first, second, third or fourth digit in the code by repeating any of the above steps.

Press any device key (TV, VCR, CBL/SAT or DVD) to exit this mode. The remote automatically exits this mode after 20 seconds of inactivity.

REASSIGNING DEVICE KEYS

You can reassign a device key (TV, VCR, CBL/SAT or DVD) to control any type device. For example, the VCR key can be set up to control a second TV, or the DVD key can be set up to control a second VCR.

Note: You must use the device category assigned to the key to perform an Auto Search and Manual Search.

View Device Codes 10