Operation | Radio Shack 20-521 guide

OPERATION

TURNING ON THE SCANNER AND SETTING SQUELCH

Note: Make sure the scanner’s antenna is connected before you turn it on.

1. Turn SQUELCH fully counterclockwise.

2.Turn VOLUME/OFF clockwise until it clicks and you hear a hissing sound.

3.Press MAN (manual) to stop the scanner from scanning, turn SQUELCH clockwise, then leave it set to a point just after the hissing sound stops.

24

Image 24

Radio Shack 20-521 owner manual Operation, Turning on the Scanner and Setting Squelch

Contents

PRO-91 150-Channel Handheld Trunking Scanner Features Page Frequency Step Transmission Range MHz KHz FCC Notice Scanning Legally Contents Special Features Trunk TrackingGeneral Guide to Scanning Page Power Sources Using Internal BatteriesPreparation Page Charging Nickel-Cadmium Batteries Using AC Power Using Vehicle Battery Power Plug the adapter’s barrel plug into your scanner’s Connecting the Antenna Connecting an Optional Antenna Connecting AN EARPHONE/ Headphones Traffic SafetyListening Safely Connecting AN Extension Speaker Attaching the Belt Clip About Your Scanner Look AT the Keypad Look AT the Display Page Service Banks Understanding BanksChannel Storage Banks Monitor Memories Turning on the Scanner and Setting Squelch Operation Storing Known Frequencies Into Channels Searching for and Temporarily Storing Active Frequencies Limit Search Direct Search Service Bank Search Search Skip Memory Listening to the Monitor Memories Moving a Frequency from a Monitor Memory to a Channel Scanning the Stored Channels Manually Selecting a ChannelPage Special Features DelayTurning CHANNEL-STORAGE Banks on and OFF Locking OUT Channels PriorityPage Using the Keylock Using the Display BacklightChanging Search Speeds Normal Search Hypersearch Turning the Battery Save Function OFF/ON Turning the KEY Tone OFF/ON Skipping Data Signals Trunk Tracking Types of Trunking Systems Setting the Scanner to the Trunk Tracking Mode Setting Squelch for the Trunk Tracking Mode Storing Trunked FrequenciesPage Scanning a Trunked Bank Monitoring an Active ID Temporarily Storing an ID into the Monitor ID Memory Locking Out IDs Unlocking a Single IDUnlocking All IDs Using Trunk Tracking Scan Delay Monitoring IDs Channel Activity Bars Scan Lists Manually Storing IDs into Scan Lists Moving IDs to Scan Lists Deleting a Stored ID Scanning the Scan Lists Scanning Type I and Hybrid Trunked Systems Programming a Fleet Map Size Fleets Subfleets IDs Blocks Used E1P1 E1P2 E1P3 Size E1P4 E1P5 E1P6 Size Selecting a Preset Fleet Map Programming a Hybrid System General Guide to Scanning Guide to FrequenciesNational Weather Frequencies Canadian Weather Frequencies Guide to the Action Bands Typical Band UsagePrimary Usage VHF Band Band Allocation Abbreviations Very High Frequency VHF Ultra High Frequency UHF Frequency Conversion Troubleshooting Problem Possible Remedy Cause Error Adjust squelch for Resetting the Scanner Care and Maintenance Specifications Power Requirement AA Alkaline Batteries 6.0 VDC Page Page Limited One-Year Warranty RadioShack Division of Tandy Corporation Fort Worth, Texas