4.Press DATA again.
5.Repeatedly press s or t to select the name of the map you want (such as E1P7). The prepro- grammed fleet map appears.
6.Press E, then SRC. The scanner then searches for transmissions using the preset map you chose.
Note: When the scanner searches for transmissions, you see Type I fleet and subfleet IDs such as
How do you know if the preset map you selected is cor- rect? Listen to see if you are following complete conver- sations. If not, try another preset map.
Programming a Fleet Map
1.Set the scanner for conventional scanning, press PROG, then press TRUNK.
2.Select the bank where you want to program the fleet map by pressing a number key.
3.Press DATA .
4.Repeatedly press s or t to select E1, then press DATA . A preprogrammed fleet map appears.
5.Repeatedly press s or t until USr appears. Then press E.
6.Press DATA .
7.Repeatedly press s or t to select the size code for the first block, then press E. The next available block appears.
Block
8.Repeat Step 7 until you have selected a size code for each block you want to work with.
51
