Before scanning a trunked system’s transmissions, you must store the trunked system’s frequencies in one of the banks in your scanner by following these steps.
1.Press PROG then TRUNK. TRUNK appears and one or more bank numbers flash.
2.Select the bank you want to store the trunked sys- tem’s frequencies in by pressing a number key. The scanner automatically selects the first channel in the bank when you select the bank.
3.Use the number keys to enter one of the trunked system’s frequencies, then press E. TRUNK, BANK and the bank number, the channel number, and the frequency appear.
Note: If you entered an invalid frequency, the scanner beeps, the channel number flashes and Error appears. If this happens, press • to clear the frequency, then repeat this step.
4.Press either PROG or s to select the next channel in the bank.
5.Repeat Steps 3 and 4 until all frequencies have been entered in that bank.
42
