1.Hold down HOUR/ANNOUNCE. The system beeps.
2.Speak clearly into the microphone from about 10 inches in front of the system. The MESSAGE indicator flashes.
3.When you finish your message, release HOUR/ANNOUNCE. The system sounds a tone and automatically plays back your recorded message.
Notes:
•The maximum length for an outgoing message is about 30 seconds. When it reaches the maximum outgoing message length, the system sounds a tone and plays back the message. If you want to record a new OGM, simply repeat these steps.
•If you record your own message and subsequently decide to use the prerecorded message, press HOUR/ANNOUNCE to play your OGM. While it is playing, press DELETE to erase the message you recorded.
•To hear the outgoing message at any time, press HOUR/ ANNOUNCE. To stop the outgoing message before it ends, press STOP/ON/OFF.
SETTING THE NUMBER OF RINGS
RING SELECT, located on the back of the system, controls how long the system waits before it answers a call. Slide RING SELECT to the desired position.
2 – The system answers after two rings.
Preparation | 11 |
