operate properly, take it to your local RadioShack store for assistance.
Problem | Remedy | |
|
| |
|
| |
The system does not | Check all phone line connections. | |
answer calls. |
| |
Make sure AC power is properly | ||
| ||
| connected. | |
|
| |
| The system is full of messages. Delete | |
| some messages | |
|
| |
| The system is off. Press STOP/ON/ | |
| OFF to turn on the system. | |
|
| |
The system does not | Check the number of devices | |
answer calls. | connected to your phone line and add | |
| up the RENs. See “Read This Before | |
| Installation” on Page 5. | |
|
| |
The outgoing | Record the announcement speaking in | |
announcement is distorted. | a normal tone about 10 inches from the | |
| system. | |
|
| |
The system does not | Reenter your remote operation security | |
respond to remote | code. | |
commands. |
| |
Check for a power failure and make | ||
| ||
| sure AC power is connected. | |
|
| |
| Do not enter commands while the | |
| system is making announcements or | |
| sounding tones. | |
|
|
CARE
Keep the system dry; if it gets wet, wipe it dry immediately. Use and store the system only in normal temperature environments.
Troubleshooting21
