When the MESSAGE indicator lights continuously, the system is ready to answer calls.
To turn off the system, press STOP/ON/OFF. The MESSAGE indicator turns off and the system beeps.
You can also turn on the system remotely (see “Setting the System to Answer Calls” on Page 12).
ADJUSTING THE VOLUME
Press or hold down VOLUME 8 to increase or VOLUME 9 to decrease the volume. The system beeps when you press either volume button so you can hear the volume level as it changes.
SETTING THE DAY AND TIME
You must set the day and time before the system will record the day/time voice stamp on each memo and incoming message.
The day/time voice stamp automatically defaults to Monday, 12:00 AM, when you connect the system to power, and does not advance until you set the correct day and time.
1.Hold down TIME/SKIP (a tone sounds) continuously through Step 4.
2.Repeatedly press DAY/REPEAT until the system announces the correct day.
3.Repeatedly press HOUR/ANNOUNCE until you hear the correct hour.
Preparation | 9 |
