75+0)"#"*'#&5'6
You can make or answer calls with handsfree convenience using an optional headset (available at RadioShack) that has a
To connect the headset, pull open the rubber cover on the side of the handset, then insert the
With a headset connected, you make or answer calls as usual using the keys on the handset.
You can use a handset holder (available at RadioShack) to hang the handset on your belt for greater convenience.
When you finish using the headset, disconnect it from the handset and close the rubber cover to protect the jack.
/#-+0)"#"%10('4'0%'" %#..
5/9#;"%10('4'0%+0)
Follow these steps to use both phone lines to set up a 3- way call. The procedure is the same for the handset and the base.
1.Place the first call on hold.
2.Make or answer a call on the other line.
3.Once you have the second party on the line, press CONF (CONF/9 on the handset) to bring in the first party. If you are using the handset, both line indicators on the base flash green. If you are using the
speakerphone, the indicators stay lit green. The handset displays 9ed\[h[dY[ above B_d[ý', B_d[ý( if you are using the handset. 9ed\ý8Wi[ and B_d[ý', B_d[ý( appear if you are using the speakerphone.
4.To end the conference call, press one line button, then the other.
To hang up one line and continue talking on the other, press the line button you want to hang up.
±"016'"±"
•Connecting a headset disconnects the handset’s earpiece and microphone, but it does not affect the speakerphone.
•SELECT/VOLUME on the handset also controls the connected headset's volume.
•If you place the handset on the base face down to recharge it while the headset is connected, be sure the handset seats properly.
Using a Headset
15
