3.Plug the battery pack’s connector into the socket in the compartment, (the connector fits only one way), replace the battery pack, and replace the cover.
To charge the battery pack, place the handset either face- up or
The CHARGE indicator on the base lights and the number of new and total Caller ID records for each line appears on the handset's display. Be sure the battery pack is properly connected before you try to charge it. The CHARGE indicator lights when the handset is on the base even if the battery pack is not properly connected.
Recharge the battery pack when Bemý8Wjj[ho flashes.
When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear a beep when you press LINE 1 or LINE 2. Return the handset to the base for about five seconds to reset the security
The supplied battery pack should last about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new
You can order a replacement battery pack through RadioShack. Install the new battery pack and charge it for about
If you have trouble replacing the battery pack, take the phone to RadioShack for assistance.#
5'66+0)"6*'"&+#.+0)"/1&'
Your phone comes set for tone dialing. If you have pulse service, you must change the dialing mode. If you are not sure which type of service you have, do this test.
1.Press LINE 1 or LINE 2 and listen for a dial tone.
2.Press any number other than 0.±
If the dial tone stops, you have
To set the dialing mode, press the line button to hang up the phone if necessary. Hold down FLASH on the base keypad until the phone beeps, then press # for pulse dialing or * for tone dialing. The phone beeps.
R"9#40+0)ýRýR"
Dispose of the old battery pack promptly and properly. Do not burn or bury it (see “Battery Safety Instructions+” on Page 5).
#"+/2146#06"#
The EPA certified RBRC® Battery Recycling Seal on the
|
|
|
±"016'"±" |
| Mode |
• If your phone system requires |
| |
| Dialing | |
that you dial an access code (9, |
| |
|
| |
for example) before you dial an |
|
|
outside number, do not press |
| the |
the access code either. |
| |
| Setting | |
• The phone exits setting mode if |
| |
|
| |
a call is received, or if you press |
|
|
either line button. |
|
|
|
|
|
9