To enter two letters from the same key in a row, press #/

7to move the cursor to the next position. For example to enter AB, press 2; 7 appears. Then press #/7, the

cursor moves to the next position, then press 2 twice so 8 appears.

To enter a space, press #/7 twice without entering any character.

To enter a number, repeatedly press the corresponding number key until the number appears.

To enter a special character, use 0. Each time you press 0, the characters appear in this order:

ç¶ý& âýá (space) &

If you make a mistake, use 6/* or #/7 to move the cursor over the error, then enter the correct character, or press DEL/FLASH to delete a character. To delete all characters, hold down DEL/FLASH for at least 1 second.

6.Press SELECT/VOLUME. Ijeh[ýDkcX[h appears.

7.Enter the number and any tone and pause entries (see “Tone Services On a Pulse Line” on Page 17 and “Entering a Pause” on Page 20).

8.Press SELECT/VOLUME. The phone beeps and C[cehoý ddýIjeh[Z appears. After 2 seconds,ýC[cehoýIjeh[ appears, and you can repeat Steps 3 – 8 to store more numbers.

To replace a stored number, simply store a new one in its place.

'FKVKPI"QT"&GNGVKPI"C"0WODGT"KP"VJG" *CPFUGV)U"/GOQT[

1.Lift the handset.

2.Hold down MEM until C[cehoýIjeh[ and a list of memory location numbers (and names, if any) appears.

3.Choose a memory location you want to edit or delete by pressing 8/INTCM or CONF/9, or entering its location number.

4.Press SELECT/VOLUME. Three options (;Z_jýC[cehoýdd,

:[b[j[ýC[cehoýdd, and =eý8WYa) appear. Press

8/INTCM or CONF/9 to choose an option, follow the instructions listed, then press SELECT/VOLUME.

Memory Dialing

19

Page 19
Image 19
Radio Shack 43-683 owner manual To enter two letters from the same key in a row, press #, ¶ý& âýá space