Radio Shack 43-683 owner manual 75+0.#5, 610548+%510#27.5, 75+06*2#+01 +064%1/#6745

75+0)"(.#5*

FLASH (DEL/FLASH on the handset) performs the electronic equivalent of a switchhook operation for special services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.±

610'"5'48+%'5"10"#"27.5'"

.+0'

Some special services, such as bank-by-phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

Dial the service’s main number. When the service answers, press TONE/*. Any additional numbers you dial are sent as tone signals. When you hang up, the phone automatically resets to pulse dialing.

75+0)"6*'"2#)+0)1 +06'4%1/"('#674'5

You can use the phone as a two-way pager and intercom between the base and the handset. This is useful if the handset is away from the base and you want to locate it, or if you want to have a conversation between the handset and the base.

To page the handset from the base, press INTERCOM. The

handset rings, and FW]_d] appears on the handset’s display. Press 8/INTCM on the handset to answer the page. ?dj[hYec

appears.

To page the base from the handset, press 8/INTCM.

FW]_d]ý8Wi[ appears, and the base rings. Press INTERCOM on the base to answer the page. ?dj[hYec appears on the

handset's display.±

To end an intercom call, press 8/INTCM or INTERCOM.

During a call, you can page someone at either the base or the handset to join the conversation.

1.Press INTERCOM or 8/INTCM. The current call is placed on hold.#

±"016'"±"

Using Flash

If you do not have any special services, pressing FLASH might disconnect the current call.

Using the Paging/Intercom Features

•The paging ends in one minute if nobody answers. Press INTERCOM or 8/INTCM again.

•You cannot page the base or handset if it is already in use. You hear a warning tone.

•If a call comes in during an intercom conversation, either of the intercom parties can answer the call as they normally would by pressing the ringing line’s button. The intercom call automatically disconnects.

Using Flash

17