Adding to the Programmed Sequence

You can add tracks at the end of a programmed sequence, up to a maximum of

32tracks.

1.Press PROGRAM in the stop mode.

2.Enter the desired track number, then press PROGRAM. The CD recorder adds the selection to the end of the programmed sequence.

3.Press Dafter adding all the additional tracks.

Erasing a Track

To erase the programmed sequence from memory, in the stop mode, repeatedly press PROGRAM CHECK until the program number to be deleted appears. Press CLEAR to delete the track.

Clearing Programmed Tracks

To clear all tracks, press D and CLEAR (or press CLEAR in the stop mode).

The program also clears when you press

OPEN/CLOSE.

Repeating Programmed Tracks

Press REPEAT 1/ALL twice and select REPEAT ALL. The CD recorder plays the programmed tracks five times then stops.

Before Recording

Before you start recording, make sure that you understand the following points:

•The CD recorder requires Digital Audio CD-R or CD-RW media for recording. Computer CD-R or CD-RW discs do not work with this CD recorder.

•Once you have recorded on a CD-R disc, you cannot erase the data from it.

•You can add tracks to an unfinalized recordable disc. Once finalized, a CD-R disc is “fixed” and behaves in the same way as a CD. You can, however, erase, refresh, and re-record finalized CD-RW discs.

•Due to the system restriction of CDs, a track cannot be less than four seconds in length, and there can be a maximum of 99 tracks on an audio CD.

•If you press D or †within four seconds from the beginning of a track, the CD recorder continues to record no signal and stops when the track’s length reaches four seconds.

•When the recording is finished, PMA WRITE and COMPLETE appear for a few seconds, and the CD recorder then stops. Do not apply shock or vibration to the CD recorder during recording.

•If the disc reaches the end during recording, the CD recorder starts a fade- out over a few seconds. When the fade- out has finished, the CD recorder finalizes the disc automatically and stops.

•If the tracks reach 99 during recording, the CD recorder stops recording.

20