When you set discs in both the PLAYBACK tray and the RECORD/PLAYBACK tray, the CD recorder repeats all the tracks of each disc alternately for five cycles and then stops.

Repeating a Designated Section (A-B Repeat)

Notes:

You cannot repeat a designated section on CD-R/CD-RW discs if they have not been finalized.

A section should be designated within a track. If the track ends or if a different track is selected before point B is selected, the CD recorder cancels the A-B repeat mode.

1.During play, press REPEAT A-Bat the point where you want to start the repeat. REPEAT A- appears.

2.Press REPEAT A-Bagain at the point where you want to finish the repeat. The CD recorder automatically repeats the selected part.

You can use @or Ito move through the CD during A-B repeat.

3.To cancel A-B repeat mode, press

REPEAT A-B,G, or OPEN/CLOSE.

Shuffle Play

To set the CD recorder to select and play all tracks in random order from the loaded CDs, during play, press SHUFFLE on the remote control. SHUFFLE lights. The CD recorder starts random play when the

current track finishes. In the stop mode, press SHUFFLE then g.

If you press Jduring shuffle play, the CD recorder randomly selects the next track. If you press F, the CD recorder plays the current track from the beginning.

To cancel shuffle play at any time, press SHUFFLE once so SHUFFLE disappears.

Note: Shuffle play can be used for both the PLAYBACK tray and RECORD PLAYBACK tray simultaneously.

Intro Check

Intro check automatically plays the first 10 seconds of each track on the CD or the programmed sequence. Press INTRO CHECK on the remote control, then g. INTRO lights. If you press INTRO CHECK during play, the CD recorder starts intro check from the next track.

Note: If you press INTRO CHECK within 10 seconds from the beginning of a track, intro check starts from that track.

To cancel intro check and resume normal play, press INTRO CHECK again.

When all the tracks of both discs have been checked, intro check stops.

18