Programming a Sequence of Tracks

You can program up to 32 selections from 2 discs to play in any order you choose.

Note: Shuffle playback does not work during program playback.

1.Using your remote control, press PROGRAM in the stop mode. STEP 01 appears and PROGRAM and the track number 1 flashes.

2.Press CD or CD-Rto select the tray, and press numeric buttons, or F or J to select a track. If you make a mistake, press the numeric buttons again.

3.Press PROGRAM to store the track into memory. The next program number STEP 02 appears.

4.Repeat Steps 2 and 3 to program more tracks, up to 32 selections. When you select tracks from the same disc successively, you do not have to press

CD or CD-R.

Notes:

•If you enter a track number higher than the highest track on a CD, the CD recorder ignores the entry.

•If you try to store more than 32 selections, the CD recorder displays

PGM FULL.

•If you press PROGRAM without selecting a track number, the CD recorder programs the first track.

•To cancel the program mode, press D and CLEAR.

5.When you finish the selection of track numbers, press D. The track number programmed to ST: 01 appears.

6.Press g to play the sequence. After the CD recorder plays all programmed tracks, it stops and ST: 01 appears. The CD recorder keeps the sequence in memory even after programmed

playback has finished or stopped by pressing D.

Notes:

•During program playback, press B once to return to the beginning of the current track. To return to the

beginning of the previous track in the

program, press Btwice. To playback the next track in the program, press C.

•If a program is stored, both g for the PLAYBACK tray and g/ENTER for the RECORD/PLAYBACK tray work to play the programmed tracks.

Checking/Changing the

Programmed Sequence

In the stop mode, press PROGRAM CHECK. The CD recorder displays the programmed sequence's first selection. Each time you press PROGRAM CHECK, the CD recorder displays the next programmed selection.

To change a selection, repeatedly press PROGRAM CHECK in the stop mode until the CD recorder displays the track number you want to change. Enter the desired track number, then press PROGRAM.

19