Operation
Playing CDs
You can use the RECORD/PLAYBACK tray to play back CD,
1.Press POWER on the CD recorder. READING flashes for a while. When no disc is set, no DISC or DISC no appears.
2.Press OPEN/CLOSE for the PLAYBACK tray or the RECORD/PLAYBACK tray.
3.Carefully place the disc, label side up, into the recessed CD holder.
4.Press OPEN/CLOSE for the PLAYBACK tray or the RECORD/PLAYBACK tray to close the disc tray. When a disc is loaded into the CD recorder, READING flashes for a while as it determines the contents of the disc. When the CD recorder reads the TOC (Table of Contents), the display shows the total number of tracks, total play time, and the type of disc (the RECORD/PLAYBACK tray only).
•When a blank disc is set on the RECORD/PLAYBACK tray, BLANK appears.
•When a disc is set on the RECORD/ PLAYBACK tray, the display shows one of the following:
CD — a commercial
BLANK — No disc or unreadable disc.
5.Press ² for the PLAYBACK tray or ²/ENTER for the RECORD/ PLAYBACK tray to start playback.
6.Press † to temporarily stop playback. To resume playback, press †, ² or ²/
ENTER.
7.Press G to stop playback.
If you set CDs on both the PLAYBACK tray and the RECORD/PLAYBACK tray, the CD recorder automatically plays the other CD when the current CD finishes. The CD recorder stops playing at the end of the second CD.
Selecting a Track
Press Bor Crepeatedly until you find the desired track.
•When you press Bonce during playback, the CD recorder plays the current track from the beginning. To
return to the beginning of the previous track, press Btwice.
•In the stop or pause mode, the CD recorder enters pause mode at the
beginning of the selected track. Press ² to start playback.
16