•The recording time of a track may slightly differ from the original one.

Serial Copy Management System

This CD recorder is in compliance with the Serial Copy Management System (SCMS) standard. This standard has been elaborated to restrict digital-to-digital copying to only the first generation. The basic rules governing this system are as follows:

Rule 1: A digital recording is possible from a digital source such as a CD, DAT, or MD onto a recordable CD-R, CD-RW, MD, or DAT through a digital input connection; however, further digital-to-digital recording is prohibited for the second and later generations.

Rule 2: When an analog source such as an analog disc or FM broadcast is digitally recorded by using a CD-R, CD-RW, MD, or DAT, this recorded source can be digitally recorded on another CD-R, CD-RW, MD, or DAT; however, further digital copying is prohibited.

Dubbing

1.Set the disc to be dubbed in the PLAYBACK tray, and a CD-R/RW recordable disc in the RECORD/ PLAYBACK tray. When a blank disc is set in the RECORD/PLAYBACK tray, BLANK appears.

2.Set the recording level. (See “Setting the Recording Level” on Page 24.)

3.Repeatedly press DUBBING MODE to set the dubbing speed.

DUBB 4X: high speed dubbing (four times as fast as the normal playback speed).

DUBB 2X: high speed dubbing (twice as fast as the normal playback speed).

DUBB 1X: normal speed dubbing.

When you set the dubbing speed, the CD recorder enters the pause mode until you are ready to begin dubbing.

Notes:

•If a recordable disc is not set in the RECORD/PLAYBACK tray, CAN’T REC appears. Replace the disc with a recordable one.

•The CD recorder automatically changes the dubbing speed from 4X to 2X if it finds a problem such as a scratched disc.

•The slower the speed is, the more tolerant the CD recorder is of errors on the CD-R/RW disc. If you are in doubt about the quality of the CD-R/RW discs, select DUBB 1X.

•If you intend to monitor the sound during high speed dubbing, turn the volume of your amplifier down enough to prevent possible damage to your system from the high-pitched sound.

•Analog output can be monitored at all three dubbing speeds but digital output can only be monitored at 1X.

4.Press g/ENTER for the RECORD/ PLAYBACK tray to start dubbing. There is a slight delay before the CD recorder begins dubbing.

21