Note: You cannot select SYNC-1for analog recording.

5.After READY appears, press g/ENTER

of the RECORD/PLAYBACK tray.

† disappears, and REC lights steadily.

6.Start playing the source. The CD recorder starts synchronized recording.

During digital recording, if the input signal stops for 5 seconds, recording stops. During analog recording, if the input signal stops for 20 seconds, recording stops.

Mixing Recording

You can mix the sound of an analog external input and a CD placed in the PLAYBACK tray on a CD-R/RW disc. For example, if you have a microphone and its amplifier, you can add narration to your CD. Or you can mix the sound of your musical instruments to your CD.

1.Connect the external analog source and load the discs.

2.Record the external analog source and then press g of the PLAYBACK tray.

Time Display

Press TIME to switch the mode of the time display. Each time you press TIME, the mode changes as follows:

In the Play/Pause Mode

• Elapsed time of the track being played.

•Total elapsed play time of tracks.

•Remaining time of the track being played.

•Total remaining play time of tracks.

•The total play time and the number of tracks.

In the Stop Mode

•The total play time and the number of tracks for both trays.

•Remaining recording time of the disc in the record tray.

In the Recording Mode

•Elapsed recording time of the track being recorded.

•Remaining recording time of disc.

Messages

BLANK — A blank CD-R/CD-RW disc is set on the tray.

CLOSE — Close the disc tray.

COMPLETE — Dubbing, recording, finalizing, or erasure has been completed.

DUBB 1X — Normal speed dubbing from the PLAYBACK tray to the RECORD/ PLAYBACK tray.

DUBB 2X — 2X speed dubbing from the PLAYBACK tray to the RECORD/ PLAYBACK tray.

27