Radio Shack CD Player Error Messages, DUBB, OPEN, STEP, ERASE, INCLVL, MANUAL, SYNC-1, SCMS —, NO DISC, READING, FINALIZE, REC **DB, SYNC-ALL, D-UNLOCK, CD-DA:D2, PGM FULL

DUBB 4X — 4X speed dubbing from the PLAYBACK tray to the RECORD/ PLAYBACK tray.

ERASE **— Erase the last track of the CD-RW disc.

ERASE ALL — Erase all the track of the CD-RW disc.

FINALIZE — Finalize the disc.

INCLVL** — Increment level

MANUAL — Auto track division is off.

NO DISC — No disc is set on the tray. OPEN — Open the tray.

PMA WRITE — Writing the recorded memories on the disc. (PMA: Program Memory Area)

READING — The CD recorder is reading the disc.

REC **DB — Recording level

STEP ** — Program number

SYNC-1— Record one track synchronously.

SYNC-ALL— Record all the tracks synchronously.

UNFINALIZ — Unfinalize the CD-RW disc.

Note: ** indicates variable.

Error Messages

When an error message appears, press D and check the cause.

CAN’T REC — Cannot record, erase, or finalize the disc. Change the disc. If the CD- RW disc is finalized, unfinalize it. See “Erasing or Unfinalizing a CD-RW” on Page 24.

D-UNLOCK— Digital input is selected, but the digital source is not connected or the source’s power is off.

DISC FULL — There is no space on the disc, or no tracks are available.

NO CD-DA:D2— Discs designed for computing systems cannot be used for recording. Use the discs bearing DIGITAL AUDIO mark.

NO SPACE:D2 — The recordable space of the CD-R/CD-RW disc set in the RECORD/PLAYBACK tray is not enough to dub the whole disc in the PLAYBACK tray. Dubbing stops halfway.

PGM FULL — 32 tracks have been programmed. You cannot program any more tracks.

SCMS —

(Serial Copy Management System) If you are trying to record digitally from a “second-generation” digital copy, try analog recording.

28