5.When the playback of the disc in the PLAYBACK tray ends, the CD recorder stops recording, finalizes the disc, and stops. PMA WRITE, COMPLETE, FINALIZE, COMPLETE appears. It takes about 1 minute to finalize the disc.
Notes:
•If the
DUBB 1/2/4X appears. It is possible to dub a part of the disc. PressCwhen DUBB 1/2/4X appears to select the track to start dubbing, then press g/
ENTER.
•When the disc reaches the end during recording, the CD recorder starts a fade- out over a few seconds. When the fade- out has finished, the CD recorder finalizes the disc automatically and stops.
•Press D of the PLAYBACK tray or the RECORD/PLAYBACK tray to stop dubbing.
•Track numbers are automatically incremented. During dubbing, you cannot add track numbers manually.
•During dubbing, only D of the PLAYBACK tray and the RECORD/ PLAYBACK tray work. When dubbing is stopped by pressing D, the CD recorder will not finalize the disc.
•If you set a
•During 2X or 4X dubbing, you cannot monitor the dubbing through the digital outputs (optical and coaxial).
•To dub only one track, program the track, then dub it. See “Dubbing a Programmed Sequence”.
•If you attempt to dub a disc that contains an SCMS copy protection signal, SCMS appears. If you press g/ ENTER, ANALOG MODE appears then the CD recorder records the entire disc at 1X speed in analog mode. When the recording finishes, the CD recorder automatically finalizes the disc.
Dubbing a Programmed
Sequence
1.Program a sequence of tracks on the CD in the PLAYBACK tray.
2.Press DUBBING MODE to select a dubbing speed.
3.Press g/ENTER.
4.At the end of dubbing, PMA WRITE then COMPLETE appears. The CD recorder does not automatically finalize the disc.
5.Repeat Steps
Notes:
•You can use Program Dubbing in all three dubbing speeds (1X, 2X, and 4X).
22