Warning: Dispose of old batteries promptly and properly. Do not burn or bury them.
Cautions:
•Use only fresh batteries of the required size and type.
•Do not mix old and new batteries, different types of batter- ies (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.
•If you do not plan to use your transmitter for a week or more, or you plan to use only AC power, remove the batter- ies. Batteries might leak chemicals that can damage the transmitter’s electronic circuits.
Notes:
•If the range decreases or the POWER indicator does not light when you turn on the transmitter, replace the batteries.
•When you connect the AC adapter, the batteries are auto- matically disconnected.
CONNECTING AND CHARGING THE RECEIVER’S BATTERY
The receiver comes with a rechargeable 3.6V nickel- cadmium battery pack installed in the battery compartment. Before using it, you must connect the battery, then charge it for about 10 hours.
Caution: Do not place the receiver onto the charger before you connect the AC adapter to the charger.
8 |
| Preparation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|