DirecTV HUGHES/ HTL-HD manual Connecting to Antennas Oval Dish Satellite A, B, C

3-4. Connecting to Antennas - Oval Dish (Satellite A, B, C)

Antenna

Cable TV

wall jack

LNB	LNB	LNB
Sat A	Sat C	Sat B

Dish

5x4 Multi-switch*

Output

ANT IN
	DIGITAL
	AUDIO	S VIDEO
CABLE IN	OUT
		OUT

VIDEO OUT

1 2

L1 L2

COMPONENT OUT (1080i/720p/480p/480i)

	DATA PORT
Y
Pb	RGB OUT

DVI-HDTV OUT

SATELLITE

PHONEIN JACK

OUT TO TV OPTICAL

R1 R2

AUDIO OUT

	TYPE
Pr	(1080i/720p/480p)

VCR

CONTROL

(1080i/720p/480p/480i)

Phone wall jack

Receiving Signals

1.Connect the “Antenna” to the “ANT IN” jack on the DIRECTV® HD Receiver using a coaxial RF cable.

2.Connect the cable TV signal to the “CABLE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable.

3.Connect “Output” of the multi-switch to the “SATELLITE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satellite dish antenna).

4.Connect the “Phone Wall Jack” to “PHONE JACK” on the DIRECTV HD Receiver using a phone cable.

NOTE NOTE

While you are a subscriber to a DIRECTV® program package, you can still view over-the-air and cable TV programs, if you make connections to the over-the-air and/or cable jacks.

A triple LNB multi-satellite dish with a SAT C LNB is required to receive all DIRECTV® High-Definition programming, along with this DIRECTV HD Receiver.

* Sat C may also be connected via a SAT B/SAT C combiner with a 4x4 multi-switch (not supplied by HUGHES). 26