DirecTV HUGHES/ HTL-HD manual Connecting to Antennas Oval Dish Satellite A, B

3. SETUP AND CONNECTIONS

3-4. Connecting to Antennas - Oval Dish (Satellite A, B)

Antenna

Cable TV wall jack

LNB	LNB
Sat A	Sat B

Dish

5x4 Multi-switch

				Output
			VIDEO OUT	COMPONENT OUT
				(1080i/720p/480p/480i)
ANT IN		1	2
					DATA PORT
	DIGITAL			Y
	AUDIO	S VIDEO					SATELLITE
CABLE IN	OUT					PHONE
		OUT					IN
					RGB OUT	JACK
		L1	L2	Pb		DVI-HDTV OUT
				TYPE		VCR
OUT TO TV						CONTROL
		R1	R2	Pr
	OPTICAL				(1080i/720p/480p)	(1080i/720p/480p/480i)
			AUDIO OUT

Phone wall jack

Receiving Signals

1.Connect the “Antenna” to the “ANT IN” jack on the DIRECTV® HD Receiver using a coaxial RF cable.

2.Connect the cable TV signal to the “CABLE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable.

3.Connect the “Jack 1” of the multi-switch to the “SATELLITE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satellite dish antenna. Use RG6 type cable.)

4.Connect the “Phone Wall Jack” to “PHONE JACK” on the DIRECTV HD Receiver using a phone cable.

NOTE NOTE

While you are a subscriber to a DIRECTV® program package, you can still view over- the-air and cable TV programs, if you make connections to the over-the-air and/or cable jacks.

A triple LNB multi-satellite dish with a SAT C LNB is required to receive all DIRECTV® High-Definition programming, along with this DIRECTV HD Receiver.

25