DirecTV HUGHES/ HTL-HD manual Connecting to Antennas Round Dish Satellite a, Dish Jack

3-4. Connecting to Antennas - Round Dish (Satellite A)

Antenna

Cable TV wall jack

LNB

Sat A

Dish

Jack 1

			VIDEO OUT	COMPONENT OUT
				(1080i/720p/480p/480i)
ANT IN		1	2
					DATA PORT
	DIGITAL			Y
	AUDIO	S VIDEO					SATELLITE
CABLE IN	OUT	OUT				PHONE	IN
					RGB OUT	JACK
		L1	L2	Pb		DVI-HDTV OUT

TYPE	VCR
	CONTROL

OUT TO TV

OPTICAL	R1	R2	Pr	(1080i/720p/480p)	(1080i/720p/480p/480i)
		AUDIO OUT

Phone wall jack

Receiving Signals

1.Connect the “Antenna” to the “ANT IN” jack on the DIRECTV® HD Receiver using a coaxial RF cable.

2.Connect the cable TV signal to the “CABLE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable.

3.Connect the “Jack 1” of the dish antenna to the “SATELLITE IN” jack on the DIRECTV HD Receiver using a coaxial RF cable. (For proper dish installation, refer to the “Installer’s Guide” provided with your satellite dish antenna. Use RG6 type cable.)

4.Connect the “Phone Wall Jack” to “PHONE JACK” on the DIRECTV HD Receiver using a phone cable.

NOTE NOTE

While you are a subscriber to a DIRECTV® pro- gram package, you can still view over-the-air and cable TV programs, if you make connec- tions to the over-the-air and/or cable jacks.

A triple LNB multi-satellite dish with a SAT C LNB is required to receive all DIRECTV® High-Definition programming, along with this DIRECTV HD Receiver.

24