DirecTV HUGHES/ HTL-HD TV Connection HD Monitor with Hdcp DVI-HDTV type, 5x4 Multi-switch Output

3-5. TV Connection - HD Monitor with HDCP (DVI-HDTV type)

	LNB	LNB	LNB
Antenna	Sat A	Sat C	Sat B
Cable TV
wall jack			Dish

HD-Ready TV

DVI-HDTV IN

.IN L R

5x4 Multi-switch

Output

			VIDEO OUT	COMPONENT OUT
				(1080i/720p/480p/480i)
ANT IN		1	2
					DATA PORT
	DIGITAL			Y
	AUDIO	S VIDEO					SATELLITE
CABLE IN	OUT					PHONE
		OUT					IN
					RGB OUT	JACK
		L1	L2	Pb		DVI-HDTV OUT
				TYPE		VCR
OUT TO TV						CONTROL
		R1	R2	Pr
	OPTICAL				(1080i/720p/480p)	(1080i/720p/480p/480i)
			AUDIO OUT

Phone wall jack

TV Viewing

1.Connect the “OUT TO TV” jack on the DIRECTV® HD Receiver to the “ANT IN” jack on your TV using a coaxial RF cable.

2.Connect the “DVI-HDTV OUT” jack on the DIRECTV HD Receiver to the “DVI-HDTV IN” jack of your TV using DVI-HDTV type connector. (The “TYPE” switch must be set toward the “RGB/DVI-HDTV” jacks.)

3.Connect the L/R “AUDIO OUT” jacks on the DIRECTV HD Receiver to the L/R “AUDIO IN” jacks on your TV using RCA-type cables.

Note : For the best access to high-definition programming at the highest available resolution broadcast by DIRECTV, connect the DVI-HDTV output to the corresponding DVI-HDTV input that supports high-band- width Digital Content Protection (HDCP) technology on a High-Definition Television (HDTV) or HDTV moni- tor. Please check your HDTV or HDTV Monitor user manual or contact the television manufacturer to find out if your HDTV or HDTV Monitor supports HDCP.

4. Select Antenna In or DVI-HDTV In, source on your TV. (Refer to TV user's manual.) 30