Notes:
•You can also press REDIAL/PAUSE after pressing TALK to dial the last number dialed.
•The redial memory holds up to 32 digits, so you can redial long- distance as well as local numbers.
•The redial memory also holds pause entries. See “Entering a Pause” on Page 17.
USING FLASH
FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.
Note: If you do not have any special phone services, pressing FLASH might disconnect the current call.
USING TONE SERVICES ON A PULSE LINE
Some special services, such as bank-
1.Be sure DIAL MODE is set to P (pulse).
2.Dial the service’s main number.
3.When the service answers, press TONE (
). Any additional numbers you dial are sent as tone signals.
The phone automatically resets to the pulse mode the next time you make or receive a call.
PAGING
To send a page from the base to the handset or to locate the handset, when the phone is not in use, press PAGE/ FIND on the base. The handset beeps for 5 seconds.
PAGE/
FIND
To locate the handset using a continu- ous beep, press and hold PAGE/FIND longer than 2 seconds.
Press any key or place the handset on the base to stop the page.
Note: The phone rings when a call comes in while you are using the page feature.
15
