Problem | Suggestion | |
|
| |
|
| |
The phone cannot be operated | Lift the base’s antenna to a vertical position. | |
at a useful distance from the |
| |
Be sure neither the handset’s nor base’s | ||
base because the signal | ||
antenna is touching a metal surface. | ||
becomes weak or noisy (hand- | ||
| ||
set’s range has decreased). | Return the handset to the base and recharge the | |
| ||
| battery pack. | |
|
| |
The handset battery pack does | Check the charging contacts on the handset and | |
not charge. | base. If they are dirty, clean them with a pencil | |
| eraser. | |
|
| |
| Be sure the battery pack is connected correctly. | |
|
| |
| Be sure the handset is properly seated on the | |
| base. | |
|
| |
| Replace the battery pack (see “Replacing the | |
| Battery Pack” on Page 25). | |
|
| |
The handset does not ring or | Move the handset closer to the base. | |
receive a page. |
| |
Lift the base’s antenna to a vertical position. | ||
| ||
|
| |
| Be sure the battery pack in the handset is con- | |
| nected and charged. | |
|
| |
| Move the base away from other electrical | |
| devices. | |
|
| |
You have an incoming call, but | Let the phone ring twice before you answer so | |
do not receive any Caller ID | the ohone has time to record the Caller ID infor- | |
information. | mation. | |
|
| |
| Check that the phone is correctly and securely | |
| connected. | |
|
| |
| Check with your phone company to verify that | |
| your Caller ID service is active. | |
|
|
If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the prob- lem, take the phone to your local RadioShack store for assistance.
23
