2.Lift the battery pack out of the com- partment.
3.Plug the battery pack’s connector in- to the socket in the compartment, (the connector fits only one way), re- place the battery pack, and replace the cover.
To charge the battery pack, place the handset either faceup or facedown on the base. The CHARGE/IN USE indica- tor on the base lights and Total:00 appears on the handset display.
Recharge the battery pack when Low Battery flashes on the display.
Note: If the CHARGE/IN USE indicator flashes when the handset is on the base, the battery pack is not connected or loosely connected. Reconnect the battery pack securely.
Notes:
•When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear an error tone when you press TALK. Return the handset to the base for about 5 seconds to reset the security
•If the handset or the base loses power, the security
•Using a pencil eraser, clean the charging contacts on the handset and base about once a month.
•If the battery pack becomes weak during a call, the handset beeps ev- ery 3 seconds and Low Battery flashes. When this happens, you cannot make a call until you re- charge the battery pack.
•About once a month, fully discharge the battery by keeping the handset off the base until Low Battery flashes on the display. Otherwise, the battery pack loses its ability to fully recharge.
9
