3.Route the adapter’s cord through the strain relief slot on the base.
4.Plug the modular cord’s other end into the phone jack.
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a vertical position.
On a Wall Plate or Wall
4.Plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
1.Plug one end of the supplied short modular cord into the TEL LINE jack on the back of the base as in “On a Desk, Shelf, or Table,” Step 1, on Page 6.
2.Insert the supplied AC adapter’s barrel plug into DC IN 9V as in “On a Desk, Shelf, or Table,” Step 2, on Page 6.
3.Route the adapter and modular cords through the grooves on the base.
5.Plug the adapter into a standard AC outlet.
6.Press and lift out the handset hold- er. Rotate it 180°, then snap it back into place so it holds the handset.
7
