MAKING AND RECEIVING CALLS
To make a call, lift the handset and press TALK. Talk and the current vol- ume setting (see “Adjusting the Handset Volume”) appear on the handset’s dis- play, and the CHARGE/IN USE indicator on the base lights. Then dial the num- ber. The number displays on the hand- set as you dial, then (after a few seconds) the call’s elapsed time dis- plays.
CHARGE/
IN USE
You can also dial the number before you press TALK.
If you make a mistake, press DELETE until the incorrect entry is erased, then enter the correct number. To delete the entire number, hold down DELETE for at least 2 seconds.
When you receive a call, Incoming Call appears on the display. To an- swer it, lift the handset from the base and press TALK. If auto talk is on, just lift the handset from the base. If the hand- set is away from the base, press any key. Talk and the current volume set- ting appear on the display.
To end a call, place the handset on the base or press TALK.
SELECTING THE
CHANNEL
The phone has 20 channels. If the call seems to disconnect for no reason dur- ing a call, press CH/SELECT on the handset to select a different channel. The display shows Scanning as your phone searches for a clear channel.
ADJUSTING THE
HANDSET VOLUME
To adjust the volume of the sound you hear through the handset during a call, press VOL/CID 
or 
on the handset until you obtain the desired volume lev- el. Volume Maximum, Volume High, Volume Medium, or Volume Low displays on the handset.
Once you set the volume level, the set- ting is maintained even after you hang up the phone.
Note: When you press VOL/CID 
while the volume is maximum or 
while the volume is low, the setting does not change and an error tone sounds.
USING REDIAL
You can quickly dial any of the last three numbers you dialed recently. Lift the handset and repeatedly press REDIAL/ PAUSE until the number you wish to dial displays. Then press TALK and the phone dials the number.
14
