INSTALLATION
MOUNTING THE PHONE
You can place the phone on a desk or table, mount it on a standard wall plate, or mount it directly on a wall.
Select a location that is:
•near an AC outlet
•near a telephone line jack
•out of the way of normal activities
•away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms, alarms, and room monitors
•away from other cordless phones
The base’s location affects the hand- set’s range. If you have a choice of sev- eral locations, try each to see which provides the best performance.
You can power the phone using the sup- plied 9V,
Cautions:
You must use a Class 2
!power source that supplies 9V DC and delivers at least
210 mA. Its center tip must be set to positive and its plug must fit the phone's DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.
•Always connect the AC adapter to the phone before you connect it to AC power. When you finish, discon-
nect the adapter from AC power be- fore you disconnect it from the phone.
Note: Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modu- lar jack, you can update the wiring your- self using jacks and adapters available at your local RadioShack store, or have the telephone company update the wir- ing for you.
The USOC number of the jack to be in- stalled is RJ11C (or RJ11W for a wall plate jack).
On a Desk, Shelf, or Table
Follow these steps when you place the base on a desk, shelf or table.
1.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.
2.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
6
