43-685.fm Page 11 Thursday, July 8, 1999 7:50 AM
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
4.Route the adapter’s cord through the narrow groove on the bracket. If you are using two phone cords, route the second cord through one of the wide grooves on the bracket.
5.To mount the phone on a wall plate, plug the other end of the short mod- ular cord into the wall plate jack, then align the bracket’s keyhole slots with the wall plate studs and slide the base downward to secure it. If you are using two phone cords, plug the second cord into the sec- ond phone jack.
To mount the phone directly on a wall, align the bracket’s keyhole slots with the mounted screws and slide the base downward to secure it. Connect the phone cord(s) to the modular phone line jack(s).
6.Plug the adapter into a standard AC outlet.
7.Press and lift out the handset holder, flip it over as shown, then snap it back into place.
8.Raise the base’s antenna to a verti- cal position.
11
