Radio Shack ET-685 owner manual Using a Headset

43-685.fm Page 23 Thursday, July 8, 1999 7:50 AM

USING A HEADSET

You can make or answer calls with hands-free convenience using an op- tional headset (available at your local RadioShack store) that has a 3/32-inch plug.

To connect the headset, pull open the

rubber cover marked on the side of the handset, then insert the 3/32-inch plug into the jack.

Notes:

•Connecting a headset disconnects the handset’s earpiece and micro- phone, but it does not affect the ET- 685’s speakerphone.

•VOL on the handset also controls the connected headset’s volume.

•If you place the handset on the base facedown to recharge it while the headset is connected, be sure the handset seats properly.

With a headset connected, you make or answer calls as usual, using the keys on the handset.

You can use a handset holder (available from your local RadioShack store) to hang the handset on your belt for great- er convenience.

When you finish using the headset, dis- connect it from the handset and close the rubber cover to protect the jack.

23