1.Lift the handset and hold down CALLER ID until Caller ID Setup appears on the display with the pointer at Line 1.
CALLER
ID
2.Use 
or 
to select Line 1 or 2, then press SELECT.
3.A menu appears with Auto Talk selected. Press SELECT to change the setting. On or Off appears, indicating the selected setting.
4.To clear the display when you finish, press HOLD/CANCEL or return the handset to the base.
TURNING CALLER ID/ CALL WAITING ON/OFF
If you have Call Waiting and Caller ID service, you can set the
Note: You must set each line for Caller ID/Call Waiting separately.
1.Lift the handset and hold down CALLER ID until Caller ID Setup appears on the display with the pointer at Line 1.
2.Use 
or 
to select Line 1 or 2, then press SELECT.
3.A menu appears with Auto Talk selected. Press 
to select CIDCW, then press SELECT to change the setting. On or Off appears indicat- ing the selected setting.
4.Return the handset to the base to store the new setting.
STORING YOUR AREA CODE
To quickly dial a number from a Caller ID record (see “Dialing Numbers from a Caller ID Record” on Page 29) or to cor- rectly store a number from a record into a memory dialing location (see “Storing a Caller ID Record to Memory” on Page 29), you must store your local area code in the
Note: Area code is set for each line sep- arately.
1.Lift the handset and hold down CALLER ID until Caller ID Setup appears on the display with the pointer at Line 1.
2.Use 
or 
to select Line 1 or 2, then press SELECT.
Note: If an area code is already stored, it appears on the display when you press SELECT. To delete the area code, press CONF/DELETE three times. Then go on to Step 4.
15
