When the scanner stops on an active frequency, press ENTER to store it in the flashing channel or press and hold 
or 
for about a second to continue the search.
Notes:
•To search the frequency band upward or downward step by step (5, 12.5, or 25 kHz), quickly press and release 
or 
. 
or 
disappears from the display. See “Specified Inter- vals”on Page 42.
•To quickly move upward or downward through the range of
frequencies, press and hold down 
or 
. The scanner tunes through the frequencies until you release 
or 
.
•If you try to store a frequency you already stored in another channel, dUPL flashes on the display for about 3 seconds, and the channel number where the frequency was previously stored appears for about 3 seconds. Select another fre- quency or press ENTER again to store the frequency into the channel.
•After you store a frequency into the last available channel, the scanner displays Ch FULL when you press 
or 
. If you press 
or 
again, the scanner continues the search but
Manually Storing Frequencies
If you know a frequency you want to store, follow these steps to store it manually.
1.Press MANUAL. MAN appears.
2.Use the number keys to enter the channel number (00 to 99) where you want to store the frequency, then press 
or 
.
23
