Radio Shack PRO-95 manual

Preparation

oWARNING o

Never install non- rechargeable batteries in the rechargeable yellow battery holder. Non- rechargeable batteries can get hot or explode if you try to recharge them.

CAUTION

•The battery holder fits only one way. Do not force it.

•Use only fresh batteries of the required size and recommended type.

•Always remove old or weak batteries. Batteries can leak chemicals that destroy electronic circuits.

•Do not mix old and new batteries, different types of batteries (alkaline or rechargeable), or rechargeable batteries of different capacities.

•If you do not plan to use the scanner with batteries for a month or longer, remove the batteries. Batteries can leak chemicals that can destroy electronic parts.

You must charge rechargeable batteries before you use them the first time. See “Charging Rechargeable Batteries” on Page 11. o

Follow these steps to install the batteries:

1.Press in on the battery compartment cover on the back of the scanner and slide the cover down to remove it.

2.Pull the battery holder out of the battery compartment.

3.If you are using non- rechargeable batteries, place them into the black holder, as indicated by the polarity symbols (+ and –) marked on the holder.

If you are using rechargeable batteries, place them into the yellow holder as indicated by the polarity symbols (+ and –) marked on the holder.

4.Place the battery holder into the battery compartment.

5.Replace the cover.

When battery power is low, Low Battery! appears and the scanner beeps continuously. When battery power is depleted, the scanner turns itself off. Replace all four non-rechargeable batteries, or recharge the rechargeable batteries. See “Charging Rechargeable Batteries” on Page 11. o

10

Image 10

Radio Shack PRO-95 owner manual Pull the battery holder out of the battery compartment

Contents

PRO-95 Dual Trunk-Tracking Handheld Scanner Features Simultaneous Trunking Your scanner includes these featuresAutomatic Channel Reviewing Locked Features Vehicle using a DC adapter not supplied FCC Wants YOU to Know Scanning Legally FCC Wants You to Know Using Vehicle Battery Power on Page 12 Ô Using BatteriesPower Sources Preparation Pull the battery holder out of the battery compartment Until Low Battery Using AC PowerCharging Rechargeable Batteries Using Vehicle Battery Power Connecting Antenna Connecting AN EARPHONE/HEADPHONES Connecting an Optional AntennaListening Safely Traffic Safety Connecting AN Extension Speaker About Your Scanner Using the Belt ClipTransferring Data to From Another Scanner or a PC About Keypad Mode changes the receive mode AM, FM, MOT, ED TUV enters an 8, or inputs characters T, U, or CL clears an incorrect entry Channel Storage Banks Quick StartUnderstanding Banks Preprogrammed Search Banks Understanding Your Scanners Modes Search Banks AM Mode Motorola Mode Understanding Your Scanners Modes Edacs Mode FFF=Fleet ID SS=Subfleet ID Or using an outdoor antenna to improve reception Open and Closed Modes Operation Turning on Scanner and Setting SquelchStoring Known Frequencies Into Channels Operation Storing Trunking Frequencies Into Channels Invalid Freq briefly Assigning a Text Tag to a Channel Storing Text Tags Assigning a Text Tag to a Group ID Assigning a Text Tag to a Bank Press Character Finding and Storing Active Frequencies Searching a Preprogrammed Frequency Range# @ + Bank Band Operation Search bank SR0 Marine band Receive mode FM Band ChartsChannel Frequency MHz Search bank SR1 CB band Receive mode AM Search bank SR2 Police/Fire band Receive Mode FM Group Frequency MHz Step KHz Search bank SR4 Ham band Receive mode FM Search bank SR3 Aircraft Receive mode AMFrequency MHz Step KHz 108.000-136.9875 Finds an active frequency, it stops searching. Ô ** Paused Manually Tuning a FrequencyListening to Weather Band Air and Limit search bands Displaying Weather Messages Digitally-encoded Same signal when an alert is broadcast,Listening to a Weather Channel Weather information on one or more of these channels Copying a Frequency into a Specified Channel Using Frequency CopyWX Alert and Beep Tone Confirmation DIG WX Stby appears Second, the frequency to be copied flashes Copying a Frequency into the Priority Channel Scanning Channels Deleting Frequencies from Channels Turning Channel-Storage Banks Off and On Locking Out Channels Special FeaturesUsing the Delay Function Locking OUT Channels or Frequencies Locking Out Frequencies Reviewing the Lock-Out ChannelsReviewing Locked-Out Frequencies Clearing All Locked-Out Frequencies in a Search Bank Press any key other than 1 to cancel clear. ÔClearing a Locked-Out Frequency Lockout list appears Manual again Changing the Receive Mode To turn off the priority feature, press PRI Using the Attenuator Might have to change the receive mode Turning the KEY Tone on and OFF Using the Display BacklightPress Func and then ATT to set Press or to select 3 Using the Keylock10 or 20 seconds then press Use Up/Down keys to set Lit off time 5 seconds appears Down keys to set contrast. appears Changing the Display ContrastCloning Programmed Data Trunking Trunking Operation Understanding Trunking Way radio users transmission on a control channel Setting Squelch for the Trunking ModeProgramming Trunking Frequencies Follow these steps to program trunked frequencies Trunked. Press Press Trunk to enter the ID program modePress PGM to enter the program mode Press PGM and press or hold Down or to select the bank. Ô Programming Motorola Trunking P001~ Bank Press Mode and select MOT 50.0 or 12.5 kHz, then press Programming Fleet Maps Down keys to set 800MHz base. Normal appearsNormal or Offset and press Press or to select Block 0 size code. Use 15 for type II. S-00 appears Block Size Code Storing Talk Group Talk Group IDSEnter the correct size code. Ô Press Scan to start scanning Memory full MOTMOT none Desired bank Dupl ID ID NoInvalid ID. appears Talk Group ID Hold To release ID hold, press Scan or Turning AN ID SUB- Bank on or OFFLocking OUT Talk Group IDS Press PGM. Ô Press Trunk Motxxxxxx or Edxxxx Delay Function in ID Indication ModeKeys to set ID delay .0 seconds 1.0, 1.5, 2.0, 2.5, 3.0, 3.5 or Seconds Clearing ALL Talk Group IDS in ONE Bank Reviewing LOCKED-OUT Talk Group IDSClearing Talk Group Any locked out IDs in a bank Changing OPEN/CLOSED Mode Or vice versa Repeat Steps 2 and 3 for each bank HAM Radio Frequencies General Guide to FrequenciesUS Weather Frequencies Birdie Frequencies VHF Low Band MHz UHF Low Band MHzVHF High Band MHz UHF High Band MHz HF Band Guide to the Action BandsTypical Band Usage VHF Band UHF Band VHF Band UHF Band Abbreviation ServiceBand Allocation Frequencies MHz Fire MHz-300 MHz MHz-30 MHzCB Band 26.965-27.405 MHz Meter Amateur Band 28.0-29.7 MHz VHF Low Band MHz-in 5 kHz steps Government Band Meter Amateur Band 50-54 MHzAircraft Band 108-136 MHz 137-144 MHz IND, MOV Centimeter Amateur Band 420-450 MHz Ultra High Frequency UHF 300 MHz-3 GHzGovernment Band 406-420 MHz Low Band 450-470 MHz Trunked Systems Band Locally Assigned 6.25 kHz steps Public Safety Band Locally Assigned in 6.25 kHz stepsCentimeter Amateur Band MHz in 6.25 kHz steps General Trunked Band in 6.25 kHz steps Frequency ConversionPrivate Trunked Band in 6.25 kHz steps Centimeter Amateur Band KHz steps Frequency Conversion Troubleshooting Problem Possible Cause Remedy Initializing Scanner RESETTING/ Initializing the ScannerResetting the Scanner Bottom line Care SpecificationsFrequency Coverage MHz ID memory banks Intermediate Frequencies if 1st 380.8 MHz MHz Antenna Parts AccessoriesExternal Antenna RG-8/RG-58 50-Ohm Coaxial Cable PC Interface Cable Connecting CableTo AC power 9V, 300 mA AC AdapterPage Page Page RadioShack Corporation Limited One-Year WarrantyFort Worth, Texas