Radio Shack PRO-95 owner manual Assigning a Text Tag to a Channel, Storing Text Tags

6.Repeat Steps 4 and 5 to enter the other trunking group frequencies for EDACS or additional control channel frequencies for Motorola systems.

7.If necessary, press MODE to change the receiving mode.

STORING TEXT TAGS

You can customize your scanner by storing text tags (up to 12 characters) for easy identification of channel transmissions, trunk IDs, or banks.

Assigning a Text Tag to a Channel

1.Press MANUAL, enter the channel number where you

want to enter the text, then press MANUAL again. M and the bank and channel number appear at the upper left corner of the display (for example: M100).

2.Press PGM. M changes to P.

3.Press TEXT. The cursor appears at the third line.

4.Enter the text using the numeral keys (see “Finding

and Storing Active Frequencies” on Page 32). Ô

For example, to identify amateur (ham) radio transmissions in the 6 meter range, input “HAM 6m” as follows:

Ô NOTE Ô If you make a mis-

take, press or

to move to the char- acter you want to change.

Operation

29