Radio Shack PRO-95 owner manual ID No, Invalid ID. appears, Dupl ID, Talk Group ID Hold

Trunking

Ô NOTE Ô

•If you made a mistake in Step 4,

Invalid ID. appears

and the scanner beeps when you press ENTER.

Start again at Step 3.

•You can enter either decimal or AFS code for ED (EDACS) ID. The default setting is decimal ID entry.

When you press FUNC then 2, AFS format appears

for about 2 seconds. Now you can enter the ID code with AFS format.

8.If you want to tag the ID, press TEXT, enter the desired text tag for the ID. Then press ENTER (see “Text Input Chart” on Page 31).

9.To store the next ID memory

in sequence, press	and
repeat Step 4.

Bank 0-0	ON	Next
ID No. 01
		location
MOT: none

10.Press SCAN to start scanning.

Ô

If you entered an ID code that is

already stored in another ID channel, Dupl ID appears. If you

want to store the ID code, press ENTER. To cancel the operation, press CL.

Bank 0-0	ON
ID No. 00
MOT: 02992
Dupl ID 1-12

Duplication

TALK GROUP ID HOLD

You can set your scanner to follow a trunking signal that you want to track during scanning. While the scanner is stopped on a voice channel (VC appears), hold down TRUNK until ID hold ON. appears.

When ID hold is activated and the scanner receives a voice channel,

64