Radio Shack PRO-95 Use the number keys, Finds an active frequency, it stops searching. Ô

Operation

Ô NOTE Ô

•You can copy and save a frequency into a specified bank, channel, or priority channel when the scanner finds an active frequency. See “Using Frequency Copy” on Page 41 to save the frequency. The frequency copy works only in search banks 2, 3, 4 and 5.

•While the scanner is searching, you can use the seek search by press-

ing FUNC then 7. Seek ON appears

on the bottom line. The scanner stops at an active frequency for five seconds and restarts searching automatically. The scanner repeats this operation.

blinks L on the second line for the lower-end limit frequency.

3.Use the number keys and

./DELAY to enter the desired lower-end limit frequency (including the decimal point).

4.Press ENTER to set the frequency. The cursor moves to H. If the entered frequency is incorrect, Invalid Freq briefly appears.

5.Enter your desired higher-end frequency and press ENTER.

6.Rotate SQUELCH clockwise and leave it set to a point just after the hissing sound stops.

7.Press SEARCH to start searching. When the scanner

finds an active frequency, it stops searching. Ô

You can set Zeromatic on or off by pressing FUNC then 0. Press FUNC then 0 again to reverse the Zeromatic setting. Whenever this feature is turned on, Zeromatic ON briefly appears then z appears at the first digit of the second line and the scanner stops at the correct frequency. When you turn this feature off, z disappears and the scanner stops when it detects an active signal. Zeromatic functions only in search banks 2, 3, 4 and 5.

There are several group banks in SR2 Police/Fire and SR4 ham bands. You can turn off or on the groups by pressing the group numbers. For example to turn off 0, press 0.

38