Radio Shack PRO-95 owner manual Copying a Frequency into the Priority Channel, Scanning Channels

copied on the channel. After about 2 seconds, the scanner automatically returns to search mode.

3.If you try to copy a frequency which is already stored, the scanner sounds the notice

tone 3 times after you press

ENTER. Dupl.f Chxxx appears at the bottom line. If you want to copy the duplicate frequency anyway, press ENTER, or if not, press CL to cancel.

Copying a Frequency into the Priority Channel

You can copy a frequency into the priority channel (see “Priority” on Page 47) when the scanner stops on the frequency during Search, Scan, Manual, Tune, or WX mode.

Press FUNC then PRI when the frequency is on the display. The display flashes twice and the frequency is copied to the priority channel.

SCANNING THE

CHANNELS

To begin scanning channels or to start scanning again after monitoring a specific channel, press SCAN. Ô

The scanner scans through all channels (except those you have locked out) in the active banks (see “Turning Channel-Storage Banks Off and On” on Page 44 and “Locking Out Channels or Frequencies” on Page 45).

Ô NOTE Ô

•You must store frequencies into channels before the scanner can scan them. The scanner does not scan through empty channels.

•To change the scanning direction, press

or .

Operation

43