Radio Shack TAD-1015 owner manual Preparation, Connecting and Charging the Battery Pack

43-774.fm Page 12 Friday, August 13, 1999 3:14 PM

PREPARATION

CONNECTING AND CHARGING THE BATTERY PACK

The TAD-1015 comes with a recharge- able nickel-cadmium battery pack in the handset. Before using your phone, you must connect the battery, then charge it for about 18 hours.

1.Remove the screw from the bat- tery compartment cover on the bottom of the handset, then press down and slide off the handset’s cover.

2.Plug the battery pack’s plastic connector into the phone’s socket. The connector fits only one way.

3.Replace the cover and tighten the screw.

4.To charge the battery pack, simply place the handset on the base. The CHARGE indicator on the base lights.

Recharge the battery pack when the BATT LOW indicator flashes.

Notes:

•If the CHARGE indicator does not light when you place the handset on the base, be sure the battery pack and AC adapter are correctly and securely connected.

•When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear an error tone. If this happens, return the handset to the base for 5 seconds.

12