Radio Shack TAD-1015 owner manual Replacing Battery Pack

Models: TAD-1015

1 36
Download 36 pages 25.56 Kb
Page 31
Image 31

43-774.fm Page 31 Friday, August 13, 1999 3:14 PM

REPLACING THE

BATTERY PACK

If you follow the instructions in “Con- necting and Charging the Battery Pack” on Page 12, the battery pack should last about one year. If the bat- tery does not hold a charge for more than 2 hours after an overnight charge, replace the battery pack with a 3.6 volt, 300 mA battery pack with a connector that fits the socket in the battery com- partment. You can order a replace- ment through your local RadioShack store.

Install the new battery pack as follows, then charge the battery for about 18 hours (see “Connecting and Charging the Battery Pack” on Page 12).

Notes:

If you have trouble replacing the battery pack, take the phone to your local RadioShack store for assistance.

To avoid losing phone numbers stored in memory, install and be- gin charging the new battery pack within 3 minutes.

1.Remove the screw on the battery compartment cover on the bottom of the handset, and slide off the cover in the direction of the arrow.

2.Gently pull on the battery connec- tor to disconnect it from the socket, then remove the battery.

3.Plug the new battery pack’s plas- tic connector into the socket and place the battery pack into the compartment.

4.Replace the cover and tighten the screw.

Cautions:

You must use a replacement bat- tery pack of the same size and type.

Do not burn or bury a battery pack.

Be careful not to short the battery pack by touching it with conduct- ing materials, such as rings, bracelets, and keys. The battery or conductor might overheat and burn.

31

Page 31
Image 31
Radio Shack TAD-1015 owner manual Replacing Battery Pack