HP LH 6000 manual Replacing the System Battery, Dimm

Chapter 6 Replacing Parts

4.If you have a rack-mounted LH 6000r, then consider removing the cables from the rear of the enclosure before extending the enclosure on the slides (if you don't have a cable management arm). If necessary, label the cables to support re-connecting them.

5.Remove the top cover (rack-mount orientation) or the left side cover (pedestal version).

CAUTION Wear a wrist strap and use a static-dissipating work surface connected to the chassis when handling components. Ensure that the metal of the wrist strap contacts your skin.

6. Locate and remove the DIMM from the I/O board.

HP NetRAID

DIMM

I/O Board

NOTE: The I/O board does NOT have to be removed to swap out the DIMM.

Remove the HP NetRAID DIMM from the I/O Board

7. Replace the DIMM and reassemble the system.

Replacing the System Battery

1A

2A

3A

4A

DIMM

Slots

1B

2B

3B

4B

Battery

System Board – Battery Location

The installation procedure is the same for the rack-mount and the pedestal HP NetServers once you gain access to the system board assembly.

82