Chapter 6

Replacing Parts

9. Identify the slot location for the DIMM being replaced.

Paired Memory Slots

Slot 1A and Slot 1B

Slot 2A and Slot 2B

Slot 3A and Slot 3B

Slot 4A and Slot 4B

10.Remove and Replace the DIMM:

a.Spread the latches outward on each socket receiving a DIMM.

b.Remove a DIMM, handling the module by its edges.

c.Align the notches on the replacement DIMM with the slot keys on the socket.

d.Press the DIMM into the socket until the latches close.

CAUTION Do not rock the DIMM into place, but apply firm and even pressure. If a gap exists between the retaining latches and the DIMM, remove the module gap.

Insert DIMMs in Matched Pairs

DIMM

Notches

Keys

Retaining

Clips

Align DIMM Notches with slot keys

NOTE

If the latches do not close, repeat until they do.

87