Chapter 1

General Information

Remove two screws securing the NetServer to the rack.

Do not remove three screws securing the hinge to the NetServer .

Top Cover

Remove two

 

screws securing

 

the NetServer

 

to the rack.

Do not remove two screws securing the bracket

to the NetServer .

Right Cover

Bottom Cover

Front of LH 6000r Screw and Cover Locations

4 Z-Bracket

3

2

 

1

Remove the

 

two screws

 

holding the

 

NetServer to

 

the bracket

Remove Z-bracket

5.The Z-bracket is used only during shipment to secure the HP NetServer to the rack. To remove the Z-bracket, remove the two screws that connect the Z-bracket to the column at the rear of the HP NetServer. Save the Z-bracket for future use.

6.At the front of the HP NetServer, pull the NetServer forward from the rack until you hear the lockout device engage with a click.

5