Chapter 6

Replacing Parts

5.Remove the two I/O fans.

6.Remove the front board hold-down.

7.Remove all PCI boards.

8.Remove the PCI board guide.

9.Disconnect all cables from the I/O board.

10.Remove the 3 screws at the rear of the I/O board that secure it to the chassis.

11.Eject the I/O board from the socket in the Power Management/Interconnection board by rotating the retaining latches until they point away from the chassis.

Raise retainer latches

Note: Pedestal version shown, rack version would be rotated 90 degrees clockwise

Disconnecting the I/O Board

12. Angle the I/O board, edge connector first, out of the chassis and remove it.

96