Chapter 1

General Information

Removing the System Board Assembly

CAUTION Extend the anti-tip foot prior to any work on a rack-mount server.

1.Log off all users and gracefully shut down the network operating system according to directions in your NOS documentation.

2.Power down the HP NetServer.

3.Disconnect the power cords and cables, and if necessary, label each one to support re- assembly.

CAUTION The power supplies will continue to provide standby current to the NetServer until the power is disconnected.

4. Follow the instructions in removing the covers to gain access to the system board assembly.

Location of System Board Assembly

WARNING Always disconnect the power cords before removing the covers, to avoid exposure to high energy levels that may cause burns when parts are short-circuited by metal objects such as tools or jewelry. Disconnect any telephone cables to avoid exposure to shock hazard from telephone ringing voltages.

5. Unlatch the blue retaining latches to release the board.

7